Deutsch 
English 
Italian Sku 12387
Tripod agitator with dissolver AISI316 for SDE Flexmix tank
€19,370.00
€23,050.30 incl. VAT
Price per piece, excl. VAT
DELIVERY TIME:
ON REQUEST
ON REQUEST
Select „share“ below, in order to generate an email template with the link to this corresponding product.
Share this product with someone
General Information
location
Bremen
condition
brand new
Other
Stainless steel tripod, Aisi 304 (1.4301)
Lifting / lowering by electric cable winch with temperature load protection
Lifting sleeve (Aisi 304) with 4 maintenance-free plastic rollers
H-foot on 4 castors for easy mobility within the company
(Alternatively the same price without castors for stationary floor mounting)
Inside foot width: 1,190 mm; lifting height: 1,200 mm; Total height approx. 3000 mm
2 fixed castors at the front, 2 swivel/brake castors at the rear
Safety circuit for agitator (agitator switches off automatically when lifted)
Container detection (start-up only possible in the lowest position and with a container underneath)
No automatic restart after lowering the agitator again
Automatic switch-off of the cable winch when the end stop is at the top and lower position
Lower position adjustable with separate adjusting ring
Safety roller switch in IP67 design
EMERGENCY STOP switch, main switch, lift/lower button, reset button
Main connection in 3 phases 400 V 50 Hz
Documentation:
Operating and assembly instructions according to the Machinery Directive
Circuit diagram
CE declaration of conformity
Lifting / lowering by electric cable winch with temperature load protection
Lifting sleeve (Aisi 304) with 4 maintenance-free plastic rollers
H-foot on 4 castors for easy mobility within the company
(Alternatively the same price without castors for stationary floor mounting)
Inside foot width: 1,190 mm; lifting height: 1,200 mm; Total height approx. 3000 mm
2 fixed castors at the front, 2 swivel/brake castors at the rear
Safety circuit for agitator (agitator switches off automatically when lifted)
Container detection (start-up only possible in the lowest position and with a container underneath)
No automatic restart after lowering the agitator again
Automatic switch-off of the cable winch when the end stop is at the top and lower position
Lower position adjustable with separate adjusting ring
Safety roller switch in IP67 design
EMERGENCY STOP switch, main switch, lift/lower button, reset button
Main connection in 3 phases 400 V 50 Hz
Documentation:
Operating and assembly instructions according to the Machinery Directive
Circuit diagram
CE declaration of conformity
Agitators
agitator
dissolver
voltage
400 Volt
power
5,5 KW
material in contact w/ medium
AISI316Ti 1.4571
shaft diameter
28 mm
blade diameter
250 mm
Dissolver:
Speed: 1400 rpm
Solid agitator shaft attached to motor with splined sleeve coupling (removable)
Agitator shaft balanced for concentricity in the speed range
1 piece dissolver disk at the end of the shaft
Total agitator weight: approx. 50 kg
Speed: 1400 rpm
Solid agitator shaft attached to motor with splined sleeve coupling (removable)
Agitator shaft balanced for concentricity in the speed range
1 piece dissolver disk at the end of the shaft
Total agitator weight: approx. 50 kg
External frequency converter Optidrive E3 5.5 KW 400 V IP 66:
Input voltage 3 x 400 V | Output voltage 3 x 400 V
No control cabinet required.Waterproof case.
Infinitely variable speed control for three-phase motors up to 5.5 KW drive power
Degree of protection IP66 | waterproof housing with switch and potentiometer for speed setting
Precise digital control at the touch of a button
Simple Installation. Basic setting with 14 parameters
Default settings, suitable for most applications
Contactor connection for easy connection
Integral RFI filter Opportunities for built-in and external filters in favor of more complete
EMC compliance
Modbus RTU
Easy integration into your control & monitoring systems
Compact body
PTC thermistor connection
EMC filter
Brake Chopper (Sizes 2 & 3 only)
Dynamic & compact options with a radiator mounted
Resistance
High overload capacity
150% overload for 60 seconds
175% overload for 2 seconds
Output frequency 0-500 Hz | PID control
Input voltage 3 x 400 V | Output voltage 3 x 400 V
No control cabinet required.Waterproof case.
Infinitely variable speed control for three-phase motors up to 5.5 KW drive power
Degree of protection IP66 | waterproof housing with switch and potentiometer for speed setting
Precise digital control at the touch of a button
Simple Installation. Basic setting with 14 parameters
Default settings, suitable for most applications
Contactor connection for easy connection
Integral RFI filter Opportunities for built-in and external filters in favor of more complete
EMC compliance
Modbus RTU
Easy integration into your control & monitoring systems
Compact body
PTC thermistor connection
EMC filter
Brake Chopper (Sizes 2 & 3 only)
Dynamic & compact options with a radiator mounted
Resistance
High overload capacity
150% overload for 60 seconds
175% overload for 2 seconds
Output frequency 0-500 Hz | PID control