Deutsch 
Italian 
Mobile vessels
Behälter KG offers a wide range of high-quality mobile process- and storage vessels, positioned on wheels or on a forklift base. Sorted by volume in ascending order, you will find a wide selection of used and brand-new mobile tanks & vessels below - all items are immediately available from stock and can be shipped worldwide.
- 9502300 liter mobile tank, Aisi 304 €700.00
- total height: 1.620 mm
- cylindrical height: 990 mm
- diameter inside: 630 mm
- 9501300 liter mobile tank, Aisi 304 €850.00
- total height: 1.620 mm
- cylindrical height: 1.100 mm
- diameter inside: 600 mm
- S96816300 liter mobile holding tank, AISI316 €3,450.00
- total height: 1.630 mm
- cylindrical height: 700 mm
- diameter outside: 760 mm
- 7917300 liter heat-/coolable tank, Aisi 304 €1,200.00
- double jacket
- agitator:agitator flange
- total height: 1.280 mm
- cylindrical height: 650 mm
- diameter inside: 740 mm
- 13172Brand new 300 Liter heat-/coolable tank, Aisi 304 €1,650.00
- double jacket: 5,0 bar
- documents available:
- total height: 800 mm
- cylindrical height: 518 mm
- diameter inside: 820 mm
- 13171brand new 300 liter tank, Aisi 304 €1,350.00
- documents available:
- total height: 800 mm
- cylindrical height: 518 mm
- diameter inside: 820 mm
- 8617313 liter heat-/coolable pressure tank, Aisi 316 €4,950.00
- double jacket: 3,0 bar
- max. excess pressure:3,0 bar
- insulation
- agitator:agitator flange
- total height: 1.600 mm
- cylindrical height: 830 mm
- diameter inside: 620 mm
- diameter outside: 730 mm
- 9334320 liter isolated heat-/coolable tank, Aisi 304 €2,200.00
- double jacket: 3,0 bar
- insulation
- total height: 1.680 mm
- cylindrical height: 1.070 mm
- total width: 830 mm
- total length: 1.300 mm
- diameter inside: 622 mm
- 8471338 liter heat-/coolable pressure tank, Aisi 316 €5,800.00
- double jacket: 6,0 bar
- max. excess pressure:3,5 bar
- insulation
- total height: 1.450 mm
- cylindrical height: 550 mm
- diameter inside: 800 mm
- diameter outside: 940 mm
- 9377400 liter mobile pressure container, Aisi 304 €800.00
- max. excess pressure:1,0 bar
- total height: 1.900 mm
- cylindrical height: 810 mm
- diameter inside: 690 mm
- 8696400 Liter fahrbare Wanne aus V2A €1,200.00
- total height: 810 mm
- total width: 750 mm
- total length: 1.150 mm
- 9449435 liter heat-/coolable pressure tank, Aisi 316 €7,500.00
- double jacket: 2,0 bar
- max. excess pressure:3,0 bar
- vacuum:1,0 bar
- insulation
- agitator:agitator flange
- total height: 1.650 mm
- cylindrical height: 670 mm
- diameter inside: 770 mm
- diameter outside: 940 mm
- 8165440 liter heat-/coolable tank, Aisi 304 €2,950.00
- double jacket
- max. excess pressure:0,5 bar
- total height: 1.780 mm
- diameter inside: 770 mm
- diameter outside: 910 mm
- 8948450 liter mobile tank, Aisi 316 €850.00
- total height: 1.780 mm
- cylindrical height: 630 mm
- diameter inside: 890 mm
- 8983500 liter tank, Aisi 304 €950.00
- total height: 1.200 mm
- cylindrical height: 520 mm
- diameter inside: 1.000 mm
- 7470500 liter tank, Aisi 304 €1,900.00
- insulation
- total height: 1.200 mm
- cylindrical height: 650 mm
- diameter inside: 990 mm
- diameter outside: 1.050 mm
- 7384500 liter heat-/coolable tank, Aisi 304 €1,750.00
- double jacket
- agitator:blade agitator
- output speed:78 rpm
- power:0.37 KW
- total height: 1.550 mm
- cylindrical height: 850 mm
- diameter inside: 900 mm
- 11580Brand new 525 liter heat-/coolable tank, AISI 316 €3,185.00
- double jacket
- agitator:agitator flange
- documents available:
- cylindrical height: 885 mm
- diameter inside: 820 mm
- 13844Brand new 540 tank, Aisi 316 €2,150.00
- documents available:
- total height: 1.410 mm
- cylindrical height: 885 mm
- total width: 880 mm
- diameter inside: 820 mm
- 14181Brand new 550 liter agitator tank with cup stirrer (type SDE) €5,450.00
- agitator:cup stirrer
- output speed:190 rpm
- power:0.75 KW
- documents available:
- total height: 1.850 mm
- cylindrical height: 1.034 mm
- diameter inside: 820 mm
- 13700Brand new 550 liter tank, Aisi 316 €1,790.00
- documents available:
- total height: 1.310 mm
- cylindrical height: 1.034 mm
- diameter inside: 820 mm
-
- double jacket: 5,0 bar
- agitator:dissolver
- output speed:1.410 rpm
- documents available:
- total height: 1.800 mm
- cylindrical height: 1.034 mm
- total width: 873 mm
- diameter inside: 820 mm
-
- agitator:dissolver
- output speed:1.410 rpm
- power:4.0 KW
- documents available:
- total height: 1.800 mm
- cylindrical height: 1.034 mm
- total width: 873 mm
- diameter inside: 820 mm
- 12027Brand new 550 liter heat-/coolable agitator tank with high-speed propeller mixer (type SDE) €5,990.00
- double jacket: 5,0 bar
- agitator:propeller
- output speed:0-1500 rpm
- power:0,75 KW
- documents available:
- total height: 1.620 mm
- cylindrical height: 1.034 mm
- total width: 873 mm
- diameter inside: 820 mm
Which stainless steel mobile vessel design variants exist?
Mobile vessels primarily differ in terms of its stand type, which depends mainly on the dimensions and weight of the vessel. The following design types of mobile vessels are most common:
- Mobile stainless-steel vessels positioned on wheels: the most common design, used for small pharmaceutical preparation / batch vessels or pilot plant vessels; high flexibility through simple internal transportation (this design is practical up to a maximum of 1000-1500 liters volume)
- Mobile stainless-steel vessel positioned on a forklift base: can be accessed 2 or 4-sided by a forklift, therefore easy to handle; advantageous for volumes that are difficult to move on wheels
- Mobile transport container: positioned on a galvanized transport frame, ideal for road transport
Mobile vessels positioned on a frame with wheels are usually equipped with a total of 4 wheels, 2 castor and 2 fixed wheels. It should be noted that for application fields in hazardous areas (ex-zone), the wheels need to have a discharge capacity. For applications with increased specific weights, it likewise needs to be verified that the load capacity of the wheels is sufficiently high.
Benefits of mobile stainless-steel vessels
Behälter KG offers a wide range of used stainless steel mobile vessel and transport tanks – all of them are immediately ready for worldwide delivery and affordable in comparison to a brand-new custom-made product.
Mobile vessels are often constructed very manually and customer-specific, since the reliable construction on a suitable frame and wheels can hardly be automated. Also, most mobile vessels are designed for sterile use as laboratory vessels or pharma batch vessels. As a result, many second-hand mobile vessels are equipped with electropolished surfaces, high-quality stirring technology or GMP-compliant fittings. These otherwise very expensive characteristics can thus be purchased at a fraction of the original cost, by selecting a second-hand stainless-steel vessel.
Various mobile vessels can also be used as cooking kettles or pilot plant vessels due to an electric heating jacket or a double jacket for hot water. As we source almost exclusively used pharmaceutical mobile vessels in the German-speaking region, our second-hand vessels have a long service and demonstrate excellent material processing and manufacturing quality.
Brand new mobile vessels and transport tanks - standardized product groups
We offer several high-quality standardized mobile vessels and transport tanks, that we pre-produce and keep in stock for short lead times. This includes both vessels positioned on wheels, as well as on a forklift base. These are our most popular standardized product groups:
- SDE flexmix positioned on forklift-base: open mobile vessel, 4-sided accessible for forklifts (300 - 1150 liter)
- SDE flexmix positioned on wheels: open mobile vessel, positioned on 4 solid wheels (300 - 1150 liter)
- Transportable container: closed container, stackable, in a galvanized transport frame (500 – 1500 liter)
All mobile vessels & tanks are also available heated, insulated or with suitable mixing technology. We can offer various types directly from stock, otherwise with short delivery times from our factory.
Custom-made brand-new mobile vessels
For specific requirements, we offer custom-made mobile vessels and transport tanks – at an attractive price point and with short delivery times. We would be happy to make you an offer according to your specifications, contact us by using our .
Our production range covers the whole range of mobile vessels, whereby we can rely on over 50 years manufacturing experience in stainless steel tanks. Design options include for example:
- Mobile stainless-steel vessels positioned on wheels (also double-walled or with agitator, if required)
- Mobile stainless-steel vessels positioned on a forklift base (also double-walled, pressure-resitant or with agitator)
- Agitated mobile vessels (electric trace heating, thermo oil jacketed or steam-heated)
- Stainless steel IBC containers with UN-approval
We would be delighted to consult you on your mobile vessel requirements and on any other questions that might potentially be present.